Water purification system can effectively get rid of muddy organic, iron, manganese and oxide, filter suspended substance, colloid, remained oxygen of micro-organism and some of height-metal ion in the raw water resource. It can also reduce hardness of water to make it all specifications of the water quality fully meet the state fresh drinking water standards, even standard of healthy mineral water.
Purify Process:
Raw water>Water pump>Silica sand filter>Active carbon filter>Sodium ion exchanger>High pressure pump>Reverse osmosis>Ozone generator>Water tank>Pure water

This stretch blow molding machine is specially designed to produce 3 to 10 liter PET bottles. Consists of main unit and rotary infrared heater. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality. During production, operator just need to put heated preform into the blow mold and press the switch, then computer will take care of the whole procedure.

Blowing process:

1) Preform inlet controlling

2) Bottle preform heating controlling

3) Blowing technology controlling

4) Bottle check and outlet

Carbonated beverages are mainly composed of water, syrup and carbon dioxide. The syrup is made through sugar melting pots and mixing tanks. After filtering, it is pumped into the syrup tank in the carbonated beverage mixer. At the same time, the sterilized product water is also pumped into the beverage mixer. The water tank is vacuum degassed to facilitate the mixing of carbon dioxide. Through the proportioning system on the beverage mixer, the water and syrup are mixed in proportion to achieve the desired taste. Under the action of controlling the appropriate pressure, the carbon dioxide is dissolved into the material. , it can be made into carbonated beverages with ideal air-locking capacity.

The filling machine adopts the structure of feeding glass bottles by feeding screw, automatically flushes the bottles, and adopts the principle of lifting and lowering of the filling valve, so that the whole line conveys the bottles smoothly.
The constant pressure filling principle is used for fixed liquid level filling, and the secondary valve opening technology is used to meet the full liquid level filling process requirements.
The rotary cap adjuster adopts pneumatic cap management, which has the functions of not damaging the surface of the cap, sending a signal for the lack of cap in the hopper, and controlling the capping machine to automatically replenish the cap.
The whole machine adopts man-machine interface operation, German SIEMENS is automatic control technology such as computer program automatic control, frequency conversion stepless adjustment and other automatic control technologies, with low temperature automatic shutdown, automatic control of feeding and reflux

We offer several different types bottle labeling machine based on your requirement. Machines can be used for PVC sleeve label, self-adhesive label, OPP/BOPP label.
Sticker labeling machine:(Normally for glass bottles)
After the bottle-separating mechanism separates the products, the sensor detects the passing of the product and sends a signal back to the labeling control system. The control system controls the motor to send out the label and attach it to the position where the product is to be labelled. The product flows through the labeling device and the labeling tape Drive the product to rotate, the label is rolled over, and the sticking action of a label is completed.
PVC labeling machine:
When a bottle on the conveyor belt passes through the bottle detection eye, the servo-controlled drive group will automatically send a label, and the brushing wheel group will brush the next label, and the label will be sleeved on the bottle.
OPP labeling machine:
It can automatically a

Wrap Around Carton Packer or Pick and Place Type Cartoning Machine can be used for glass bottles packaging. The bottles are separated into multiple lanes on the conveyor belt, the bottles are grouped and dropped onto the cardboard by the bottle drop break. During bottle drop break and cardboard drop, pass through a set of template blocks and then fold the cardboard into a carton form. The main drive drives the carton forward, and at the same time, the top of the carton is sprayed with glue through the glue spraying break, and the cam breaks again and folds through the top frame, and the top carton is folded on the same top carton to complete the top sticking.